Victron Energy VSBP-220 SMART BATTERY PROTECT 12/24V 220A

Overview

6-35V DC Smart BatteryProtect 12/24V 220A

• Protects the battery against excessive discharge and can be used as a system on/off switch
  The Smart BatteryProtect disconnects the battery from non-essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.
  The on/off input can be used as a system on/off switch.

Key Features

12/24V Auto Ranging

• The Smart BatteryProtect automatically detects system voltage one time only.

Bluetooth: Programming Made Easy

• Using Bluetooth, programming the Smart BatteryProtect is simple. Any required engage/disengage levels can be set.
• Alternatively, one of nine predefined engage/disengage levels can be set with the programming pin (see manual).
• Bluetooth can be disabled if required.

Special Setting for Li-ion Batteries

• In this mode, the BatteryProtect can be controlled by the VE.Bus BMS.
• Note: The BatteryProtect can also be used as a charge interrupter between a battery charger and a Li-ion battery. See connection diagram in the manual.

Ultra-Low Current Consumption

• Especially important for Li-ion batteries after low voltage shutdown.
• For more details, refer to the Li-ion battery datasheet and VE.Bus BMS manual.

Over Voltage Protection

• To protect sensitive loads, the load is disconnected whenever the DC voltage exceeds 16.3V or 32.6V.

Ignition Proof

• No relays, only MOSFET switches—ensuring no sparks.

Delayed Alarm Output

• The alarm output is triggered if the battery voltage drops below the preset disconnect level for more than 12 seconds.
• Starting the engine will not activate the alarm.
• The alarm output is a short-circuit-proof open collector output to the negative rail (max. current 50 mA). It is typically used to activate a buzzer, LED, or relay.

Delayed Load Disconnect and Reconnect

• The load disconnects 90 seconds after the battery voltage drops below the preset level.
• If the voltage increases to the connect threshold within this period (e.g., after starting the engine), the load will not be disconnected.
• The load reconnects 30 seconds after the battery voltage rises above the preset reconnect voltage.

Product Details

• Selling Unit: EACH
• Model No: VSBP-220
• Inventory Code: 64900-358A
• Brand: Victron Energy
• Original Brand: Victron Energy BPR122022000
• Description: 6-35V DC Smart BatteryProtect 12/24V 220A w/Bluetooth BPR122022000
• Application: Smart Battery Protector
• Voltage: 12/24V
• Size: 220A
• Dimensions:
  • Width: 120mm
  • Height: 62mm
  • Length/Depth: 123mm
• Weight: 800g